Looks intentional on camera
Light-reflective flake or metallic that matches modern workplace design, not a gray warehouse film in the lobby.
Office floor coatings
Office floor coating in Metro Detroit is a flake or metallic system for lobbies and workspaces that looks like an office instead of a warehouse, takes rolling chairs and coffee spills, and goes down on weekend windows so Monday stand-ups still happen.
- Phased Installs
- Written Warranty
- Polyaspartic Systems
Polished concrete dusts. Carpet tiles stain at the kitchenette. We grind and install flake or metallic that takes rolling chairs and coffee spills.
Weekend windows and elevator scheduling are part of the quote, not a surprise. The finish should look intentional on camera, not like leftover industrial.
Walk the suite with us. We quote around building rules and Monday stand-ups. Get your free quote →
What do your office floors look like when they are done?
These are workplace floors we installed in Metro Detroit, same flake and metallic systems we spec so a lobby looks finished instead of industrial.
Does office epoxy look like an office or a warehouse?
It looks like an office when we spec flake or metallic against your lighting. Warehouse gray is a choice, not the default.
Coffee and chair traffic
Sealed slab, no wax cycle, no dusting onto cables. Casters take a real topcoat, not a cheap sealer.
Weekend installs
We coordinate elevators, HVAC, and furniture so Monday still happens. Lobbies can phase separately from suites.
What actually happens when you coat an office?
We coordinate elevators and HVAC, grind, coat on weekend windows, and phase lobbies separately from suites so Monday still happens.
- 1
Walkthrough & spec
You leave with a written spec matched to traffic, chemicals, and hours. We walk the floor on site and quote with the downtime plan on the page, no pressure.
- 2
Grind & repair
The slab is profiled before any coating goes down. We diamond-grind, repair joints, and moisture-test so the film has something to hold.
- 3
Coat
You stay open on the zones we are not coating. Base coat, then flake, quartz, or metallic, phased by aisle or bay around your shifts.
- 4
Open for traffic
Shifts return on the window we write down. A UV-stable polyaspartic topcoat and fast-cure chemistry are how the floor opens on schedule.
What do office managers usually ask before they coat?
It looks like an office when we spec flake or metallic against your lighting, not a gray industrial film. Lobbies photograph. Suites take chairs and coffee. Weekend windows keep Monday. Metro Detroit workplaces pick this to kill the wax cycle and the dusty polish. We sample in the suite so you see the real light.
Most suites coat across one or two closed weekends. Lobbies can phase separately. Elevator bookings and building rules are part of the quote. A surprise weekday grind next to accounting is not the plan. We coordinate with property management before we show up with grinders.
We use low-odor systems and coordinate HVAC isolation with building engineering. After-hours is the default. Occupied floors above you still matter. A downtown Metro Detroit tower has rules a standalone office does not. Those rules go on the schedule, not in a fight on Saturday morning.
A proper topcoat takes casters. Cheap films scuff. We spec the coat, not a sealer. Chair mats are optional, not required, if the system is right. Kitchenette zones can get a slightly tougher build. Tell us how dense the desks are. That changes the spec more than a mood board.
Yes. Samples against your palette before production. LED office light lies compared to the window line. We sample in the suite. Close is the goal. A printed brand chip will not be pixel-identical to a metallic pour, and we say that up front.
Furniture in the coat zone has to move. Phasing lets one wing stay live while the other coats. Full empty is faster. Occupied weekends are normal. IT will want cable paths planned. The move list is with office managers before grind day, not after the first desk is in the way.
Yes if the slab is sound. Coffee and water sit on top instead of staining carpet. Transitions to remaining carpet are detailed so there is not a trip. If the slab is a mess under old glue, demo is part of the job. We will say if coating is the wrong spend.
Yes. Same crew, two specs. Lobbies get the show finish. Suites get a more practical flake that hides chair traffic. Many Metro Detroit offices coat both on consecutive weekends. Color families can still talk to each other at the reception door.
Feet are often Sunday night or Monday morning on polyaspartic if we started Friday. Heavy furniture waits on the window we write down. Cool buildings run slower. Rolling loaded credenzas on a green film will print. Monday is the constraint we plan backward from.
What other workplace floors do you coat besides offices?
The same Metro Detroit crew coats retail, clinics, and showrooms when those rooms need a finish that still works under daily traffic.
How do I get an office floor quote in Metro Detroit?
Walk the suite with us. We quote around building rules and Monday stand-ups, with elevator and HVAC notes on the page.