Grease wipes off
No grout lines holding oil, sauce, or coffee. A sealed Metro Detroit kitchen floor mops after dinner instead of staining into the joints.
Kitchen floor coatings
Kitchen floor coating in Metro Detroit is a seamless grind-and-seal quartz or flake system that wipes grease, sauce, and wet boots without grout lines, and you can usually walk on it the next day after we remove failing tile or vinyl and diamond-grind the slab underneath.
- One-Day Install
- Written Warranty
- Polyaspartic Systems
Kitchens take grease, dropped pans, and wet boots from the back door. We remove what is failing, grind the slab, and put down a quartz or flake system that is one continuous surface.
It is easier to clean than tile and tougher than vinyl. We spec texture so a wet kitchen is not a skating rink.
We check the slab, talk slip resistance, and quote the same visit. Get your free quote →
What do your kitchen floors look like when they are done?
These are seamless kitchen and indoor floors we installed in Metro Detroit, same quartz and flake systems we spec for cooking spaces.
Can you put epoxy on a kitchen floor I cook on every day?
Yes. A quartz or flake kitchen floor in Metro Detroit wipes grease and spills with no grout, and we add texture so wet spots are not slick.
Seamless
One membrane from the island to the back door so crumbs and spills have nowhere to sit. That is the point of coating instead of grout.
Texture if you want it
Quartz broadcast or an additive keeps wet floors from turning into skating rinks. We spec grip around the sink and back door, not just a glossy showroom look.
What actually happens when you coat a kitchen floor?
Failing tile or vinyl comes out, we grind the slab, then quartz or flake goes down. Most kitchens take one to two days plus a short cure window.
- 1
Measure & quote
You get a written quote the same visit. We look at the slab, talk finish options, and leave the number with you, no pressure.
- 2
Grind & repair
The coating can last because the slab is actually prepped. We diamond-grind, fix cracks, and moisture-test before any product goes down.
- 3
Coat
The finish you picked goes down the same day on most homes. Base coat, then flake, quartz, or metallic, wall to wall.
- 4
Seal
Most homes take light use the next day. A UV-stable polyaspartic topcoat seals the system, and we write the exact window before we leave.
What do homeowners usually ask before they coat the kitchen?
Yes. A quartz or flake kitchen floor in Metro Detroit is built for grease, dropped pans, and wet boots, not just a showroom photo. We grind the slab, spec texture in splash zones, and you typically walk on it the next day. Hot pans still belong on trivets, same as stone. The floor is for feet and spills, not a stovetop.
Usually the tile comes out so we can grind the slab. Hollow or loose tile always comes out. Coating over failing grout traps movement and moisture, which is how kitchen floors peel. We check for hollow spots on site and tell you the removal plan before we quote a warranty-backed job.
Light foot traffic is often the next day on polyaspartic. Heavy appliances wait 48 to 72 hours so the film can cure under the fridge and range. You cannot cook on the floor while we grind. Most Metro Detroit kitchens are a one- to two-day job plus that cure window, and we write the schedule before we start.
Gloss can be. We add quartz texture or an anti-slip additive in kitchens that see spills, kids, and a back door to the yard. Dining-adjacent open plans can stay smoother if you want the look. We spec both on the same visit so you are not surprised the first time someone spills pasta water.
Quartz reads more like stone and takes grease well. Flake hides crumbs in a busy family kitchen. Both are seamless, with no grout. Metallic is possible but shows every footprint in a cooking space. We will say which finish matches how you actually use the room in Metro Detroit.
Yes on a sound slab. Vinyl lifts at the sink and laminate swells from dishwater. A ground-and-sealed quartz or flake floor wipes and does not have seams for water to enter. If the slab is rotten or the subfloor is wood, we tell you coating is the wrong product before you spend the money.
Yes. We coat to the cabinet kicks and island base so there is not a dirt trap. Moving the island is rarely required unless you asked for a full under-cabinet coat. We mask appliances that stay, and we tell you what has to roll out. Edges and transitions are part of the quote, not extras on install day.
Not with the UV-stable topcoats we spec where sun hits. Cheap indoor epoxy can amber in a south-facing kitchen. Metro Detroit jobs that see glass and a slider get an aliphatic finish so the floor stays the color you picked. We check sun load on the same walkthrough as the slab.
Mop or wipe. Grease and sauce sit on top instead of in grout. Avoid harsh strippers and abrasive pads that cut the topcoat. A neutral cleaner is enough for daily use. We leave simple care notes so you are not guessing after the first spaghetti night.
What other surfaces do you coat besides kitchen floors?
The same Metro Detroit crew does epoxy counters, bathrooms, and laundry rooms when you want one finish through the wet rooms.
How do I get a kitchen floor quote in Metro Detroit?
We check the slab, talk slip resistance, and give a written quote the same visit. No pressure to book on the spot.