Insights & Guides
Tips, techniques, and stories from the floor coating experts at Elite Epoxy Design.
Three coating chemistries dominate the garage floor market. Here's how polyaspartic, epoxy, and polyurea actually compare on durability, install time, cost, and lifespan — and how to know which one belongs on your slab.
Read the guide →Showroom floors photograph the cars. Here's how metallic epoxy is specced for Metro Detroit dealerships: UV at the glass, phased sales-floor installs, and why service bays stay flake.
Read more →Michigan driveways take UV, plows, and freeze-thaw. Here's when an exterior coating is honest, when garage epoxy will fail outside, and how walkways differ from a parking pad.
Read more →Mechanic bays soak oil into concrete until nothing looks clean. Here's the polyaspartic flake spec for Metro Detroit shops: degrease, grind, bay-by-bay phasing, and what peel actually means.
Read more →Basement epoxy is not a garage spec. Here's typical Metro Detroit cost, moisture testing, flake vs metallic, and how long you are out of the room — without fake 'lifetime' claims.
Read more →Moisture vapor under an old slab pushes coatings off from below. Here's how calcium chloride and meter tests work, what numbers mean, and when a moisture primer is required.
Read more →DIY epoxy often lasts 3–5 years in a daily garage. Professional polyaspartic flake systems commonly run 10–20 years when the slab is ground and moisture-tested. Here's what actually changes the number.
Read more →Forklift turns destroy thin warehouse paint. Here's how quartz and high-build epoxy are specced for Metro Detroit distribution — wheel loads, joints, striping, and phased installs.
Read more →Inspectors notice grout, ponding, and grease at the fryer line. Here's how a seamless quartz kitchen floor is specced for Metro Detroit restaurants — drains, texture, and after-hours installs.
Read more →Michigan road salt and freeze-thaw destroy thin garage epoxy. Here's how a polyaspartic system handles brine, hot tires, and slab movement — and what fails by March.
Read more →Polyaspartic garage floors can take light traffic in about 24 hours — if the slab is ground and the chemistry is real polyaspartic, not overnight epoxy. Here's the timeline, limits, and who it's for.
Read more →Eighty percent of epoxy floor life is decided before resin hits the slab. Here's the real prep sequence: grind, moisture test, repair, then coat — and what happens when a crew skips it.
Read more →Flake hides dirt and daily wear. Metallic is the liquid-metal showpiece. Here's how to pick the right epoxy finish for garages, basements, and showrooms — without buying the wrong look.
Read more →Most professionally installed garage floor coatings in Metro Detroit run $5–$12 per square foot. Here's what drives the price, what a cheap bid usually skips, and how to budget a two-car garage.
Read more →Metro Detroit garages face challenges most national coating companies don't account for — freeze-thaw cycles, road salt, MVT from older slabs. Here's what to look for in a local installer and what your slab actually needs.
Read more →If your garage floor coating is peeling, flaking, or lifting, the cause is almost always one of seven things. Here's how to diagnose the problem and what to do about it.
Read more →Loading stories…