Moisture first
We do not coat a damp slab. High vapor readings get a primer or a no, honestly, because peel downstairs starts with skipped moisture tests.
Basement floor coating in Metro Detroit is a moisture-tested grind-and-seal system that stops concrete dust, stains, and damp-slab peel so a below-grade room can actually function as living space, and furniture typically goes back in 48 to 72 hours after we confirm the vapor reading is in spec.
Below-grade slabs hold moisture and shed dust onto furniture and HVAC. We test vapor first, then coat with a basement system, not a garage formula copied downstairs.
Flake or quartz works for family rooms and gyms. Metallic is for bars and lounges that get less traffic. If the reading is too high, we prime or we stop.
We test moisture, measure, and quote on site. Get your free quote →
These are finished Metro Detroit basements, same moisture-tested systems we install in rec rooms, gyms, and bars.




Yes, if we moisture-test first and the slab is dry enough to coat. A Metro Detroit basement that still leaks or reads high vapor will peel, so we primer, delay, or decline instead of guessing.
We do not coat a damp slab. High vapor readings get a primer or a no, honestly, because peel downstairs starts with skipped moisture tests.
A sealed basement floor stops powder from landing on furniture, toys, and HVAC. That is the first thing homeowners notice after install.
Decorative flake, quartz, or metallic finishes work for gyms, bars, and finished rec rooms so the basement does not still feel like leftover concrete.
We test vapor, grind, repair, and coat. Most rec rooms finish in one to two days, then furniture waits on the cure window we write down.
You get a written quote the same visit. We look at the slab, talk finish options, and leave the number with you, no pressure.
The coating can last because the slab is actually prepped. We diamond-grind, fix cracks, and moisture-test before any product goes down.
The finish you picked goes down the same day on most homes. Base coat, then flake, quartz, or metallic, wall to wall.
Most homes take light use the next day. A UV-stable polyaspartic topcoat seals the system, and we write the exact window before we leave.
Only if the slab is dry enough now and we test vapor before coating. Active water, a live leak, or a sky-high moisture reading is a no until plumbing or drainage is fixed. Metro Detroit basements fail when someone skips that test and paints garage epoxy downstairs. We measure, then spec a primer or stop.
If it is dry now and the leak is fixed, often yes. Standing water last spring is not an automatic rejection, but we still test vapor and look at staining along the walls. Active seepage means coating will trap a problem, not hide it. We tell you that on site before you spend money on a finish.
Foot traffic is typically 24 hours. Heavy furniture, gym gear, and pool tables wait 48 to 72 hours so the film can cure. We write the move-back window on the quote so you are not guessing while stuff sits in the garage. Cooler below-grade rooms can run a little longer, and we account for that.
Flake hides scuffs in busy rec rooms, playrooms, and home gyms. Metallic is for bars and lounges that get less foot traffic and more of a showpiece look. Both work in a Metro Detroit basement if moisture is in spec. We will say if a high-gloss metallic will show every chair scuff in your space.
Yes, with extra traction on the treads so they are not a skating rink. Stairs are quoted separately because the grind, masking, and nosing detail take more time than a flat rec room. Most homeowners do the floor and stairs together so the finish matches. We measure rise and run on the same visit.
It stops dust and surface moisture film, which is a lot of what people call basement smell. It does not fix a wet foundation, mold in the walls, or a crawlspace that still leaks. If the slab is dry and we seal it, the powder-and-damp odor usually drops hard. We still want a working dehumidifier in most Metro Detroit basements.
Most finished rec rooms are a one- to two-day grind and coat, then you wait the cure window before furniture. You cannot live on the floor while we grind. We plan around access to the mechanical room and laundry if those sit on the same slab. You get a written schedule before we start.
Only if it is bonded. Peeling masonry paint and failed DIY kits have to come off. We test adhesion and tell you whether we can grind through or whether the old film has to be removed first. Coating over failed paint is how basement floors peel in the first humid summer.
No. Below-grade slabs need a moisture plan that a typical garage job does not. We still grind and often use polyaspartic, but vapor readings drive primer choice. Copying a garage flake kit downstairs is a common peel. We spec the basement as its own job in Metro Detroit.
The same Metro Detroit crew coats garages, laundry rooms, and sunrooms when you want one finish through the house.
We test moisture, measure the slab, and give a written quote on site. If the basement is too wet to coat, we say so.