Finish that matches the brand
Flake, quartz, or metallic, picked against your fixtures and lighting, not a leftover palette. The wrong finish is what looks cheap next to the rack.
Retail floor coatings
Retail floor coating in Metro Detroit is a grind-and-seal flake, quartz, or metallic system that matches the brand, survives the salt-and-grit entrance, and can go down on overnight or closed-day windows so registers reopen on schedule instead of sitting behind a week-long close.
- Phased Installs
- Written Warranty
- Polyaspartic Systems
Scuffed VCT and stained grout sell the wrong story before a customer hits the rack. We grind, then install flake, quartz, or metallic that photographs well and hoses clean.
Entries get a tougher build. Fitting rooms can get the show finish. Overnight windows are the default for stores that cannot lose a Saturday.
Walk the store with us. We quote overnight or closed-day windows. Get your free quote →
What do your retail floors look like when they are done?
These are sales floors we installed in Metro Detroit, same flake, quartz, and metallic systems we spec to match the brand and survive the entrance.
Can we stay open while you coat a retail floor?
Often yes, with overnight or closed-day windows, and bigger stores phase by zone so some registers stay live.
Entries that take the traffic
Door lines get a tougher build so salt and grit do not wreck the sales floor. Metro Detroit winters start at the mat, not the back wall.
Overnight when you need it
Closed-day and after-hours windows so registers reopen on schedule. We confirm square footage and cure against your open time.
What actually happens when you coat a retail store?
We sample finish against your lighting, grind, spec a tougher build at the door, and coat on the closed hours you already have.
- 1
Walkthrough & spec
You leave with a written spec matched to traffic, chemicals, and hours. We walk the floor on site and quote with the downtime plan on the page, no pressure.
- 2
Grind & repair
The slab is profiled before any coating goes down. We diamond-grind, repair joints, and moisture-test so the film has something to hold.
- 3
Coat
You stay open on the zones we are not coating. Base coat, then flake, quartz, or metallic, phased by aisle or bay around your shifts.
- 4
Open for traffic
Shifts return on the window we write down. A UV-stable polyaspartic topcoat and fast-cure chemistry are how the floor opens on schedule.
What do store owners usually ask before they coat?
Smaller stores often coat overnight or on a closed day. Bigger boxes phase by zone so some registers stay live. We confirm square footage, cure, and your open time on the walkthrough. A week-long close is a choice, not the default. Metro Detroit retailers that plan the window keep Saturday. That plan is on the quote.
We sample against your lighting. Metallic and flake both work. The wrong one is what looks cheap. A leftover garage blend under designer fixtures is the miss. Bring the brand guide. We pull samples before production so you are not surprised on open morning.
High-traffic doors get quartz or a heavier flake. The rest of the floor can stay refined. Salt and grit wreck a thin showroom film at the mat. We spec the door line as its own build. That is how Metro Detroit retail floors still look new in March.
Some can be masked. Heavy gondolas usually move. We plan that with your team. Leaving a rack in place makes an uncoated island. Empty is faster. Occupied overnight is normal if we can stage. The move list is part of the walkthrough, not a 9 p.m. surprise.
Yes. Samples against your palette and lighting before we coat. LED retail light lies compared to daylight, so we sample in the store. Close is the goal. Pixel-identical to a printed swatch is not. You approve a sample, then we produce.
Entries and wet vestibules get texture. The sales floor can stay smoother for carts and heels. We spec both. A glossy ice rink at the door is the wrong call in Michigan. Tell us about mop protocol and we will not fight it.
Light foot traffic is often the next morning on polyaspartic. Heavy fixtures wait on the cure window we write down. Rolling loaded gondolas on a green film will print. Ops gets a reset time, not a vague “soon.” That is how Monday open actually happens.
Yes. Show finishes in small rooms, tougher builds on the aisle. Same crew, two specs. Many retailers coat the box first and the fitting rooms on a second night. Color families can still match. We quote zones separately if the calendar needs it.
Yes on a sound slab. A sealed quartz or flake floor mops. No annual strip. If the slab is a mess under the VCT, demo is part of the job. Coating is not a miracle over rotten underlayment. We will say if replacement is the cheaper honest path.
What other customer-facing floors do you coat besides retail?
The same Metro Detroit crew coats showrooms, restaurants, and offices when those rooms have the same brand and traffic problem.
How do I get a retail floor quote in Metro Detroit?
Walk the store with us. We quote overnight or closed-day windows, including fixture moves and the door-line spec.